$3.99
Coil Jig Tool:
- Brushed aluminum
- Set of 5 steps: 1.5mm, 2mm, 2.5mm, 3mm, and 3.5mm
Out of stock
Coil Tool
Home / ace vaper store / Uncategorized / Coil Tool
$3.99
Coil Jig Tool:
Out of stock
| Weight | 0.012 lbs |
|---|---|
| Dimensions | 11 × 1 × 1 in |
You must be logged in to post a review.
robseivewright (verified owner) –
This thing works great. Makes wrapping different sized coils a breeze. My only issue is its not easy to use this tool to guide a 3.5mm coil into posts on some decks every other size works just fine though.
Chad (verified owner) –
This is a very handy tool even for experienced coil makers. A must have in your kit!!
ANDREMWLEE –
These tools are great to get started with when building coils. I personally prefer the coil master ones though.
moefortin1 (verified owner) –
it works quite well, I am thinking I will take a small drill bit and put a teeny hole in each “stage” to hold the wire more easily, could be a coil master type jig done on the cheap. it works quite well, though is a bit short so it makes holding by hand and making nice tight coil hard, but, if were longer probably make more difficult just the same…the little hole likely work well, and even if I muck it up, thats ok, they are low cost :)